GoEastAI Request a Quote
HomeEquipmentPower & Transmission EquipmentTransmission Supporting Devices35 kV Dry-Type Transformer (PWR-024)35 kV Dry-Type Transformer
35 kV Dry-Type Transformer full equipment view 1 / 2
Full equipment view
35 kV Dry-Type Transformer (PWR-024)Item PWR-024

35 kV Dry-Type Transformer

35kV级干式变压器

35 kV epoxy-resin dry-type transformer with copper wire or foil windings and source-stated F- or H-class insulation.

Project-specific configurationOnly sourced values are shown. GoEastAI confirms remaining parameters during technical review.
Request this equipment Ask a question

Manufacturing source: Baoding Zhongyi Electric Group Co., Ltd. — Supplier Profile

Equipment overview

Built around the confirmed duty

The official source describes a 35 kV dry-type transformer using epoxy resin as the main insulation material. High- and low-voltage windings are made with copper wire or foil, vacuum cast in epoxy resin and cured into a high-strength structure.

Working principle

Electromagnetic induction transfers power between the high- and low-voltage windings. The solid cast-resin insulation and air-cooling arrangement avoid the use of transformer oil.

Power and transmission equipment selection is based on power or torque, speed, load profile, service factor, electrical supply, mounting, environment, efficiency and integration requirements.

Core features

  • Vacuum-cast epoxy insulation
  • Copper wire or foil high- and low-voltage windings
  • High-strength cured winding structure
Technical parameters

Reference specification checklist

Use these common industrial selection fields to prepare the inquiry. They are not a manufacturer datasheet or guaranteed performance values.

Source-supported dataValues currently supported by supplied material
ParameterConfirmed valueBasis
Voltage class35 kVOfficial product page
Insulation systemEpoxy-resin castOfficial product page
Insulation classF or HOfficial product page
Winding conductorCopper wire or foilOfficial product page
Planning reference

Parameters to confirm before quotation

Final values remain subject to supplier technical review.

Swipe horizontally to view all parameter columns.

ParameterReference settingTypical unitSelection note
Rated power / torqueContinuous and peak dutykW / N·mInclude starting and overload requirement
Input / output speedProcess requirementr/minOperating range, ratio and direction as applicable
Electrical supplyDestination-specificV / Hz / phaseVoltage tolerance, starting and harmonic limits
Load profile and service factorRequired—Hours, starts, shock, inertia and reversing duty
Protection and environmentSite design basisIP / °CAmbient, altitude, dust, moisture and hazardous area
Mounting and shaft interfaceConfirm drawingmmFrame, flange, foot, shaft, key and coupling details
Efficiency / insulationProject targetIE class / classEfficiency, insulation, cooling and temperature rise
Control and monitoringLocal / VFD / plant integrated—Sensors, protection, communication and condition monitoring
Application and configuration

Build the inquiry around the real project

Use the product type as the starting point, then confirm service conditions, options, documentation and delivery requirements.

01

Typical applications

35 kV industrial distributionSubstations and utility systemsInfrastructure and manufacturing facilities
02

Materials and options

  • Winding conductor, core, insulation and enclosure materials are confirmed for the selected design.
  • Corrosion protection and environmental protection level are selected for the installation site.
  • Voltage ratio, capacity, vector group, impedance and tapping arrangement to be confirmed.
  • Monitoring, protection, enclosure, cable interfaces and accessories to be confirmed.
03

Standards and documents

  • Applicable national, IEC and destination requirements are confirmed during technical review.
  • Routine, type and special test scope is agreed in the quotation.
  • Manufacturer and model confirmation
  • Technical datasheet and dimensional drawing
  • Inspection, certificates and manuals
Supply and support

Delivery, packing and after-sales

Final scope, responsibilities and timing are confirmed in the quotation.

04

Delivery

  • Manufacturing schedule, Incoterm and shipment scope are confirmed after technical review.
  • Final delivery timing depends on the confirmed rating, configuration, testing and destination.
05

Packing and shipping

  • Export packing and moisture protection are selected for the final dimensions and transport route.
  • Bushings, instruments, loose parts and document packs are protected and identified for shipment.
06

After-sales

  • Installation guidance, commissioning support and spare-parts scope are confirmed in the quotation.
  • Warranty conditions and response responsibilities are agreed before order placement.
Similar products

Explore related equipment

Products in the same equipment family are shown first, followed by other relevant products in the same industrial system.

Request a quotation

Request this equipment directly.

The selected product is already linked to this RFQ. Add the duty, quantity, destination and any required standards so GoEastAI can prepare the correct supply proposal.

  • Equipment and intended application
  • Capacity, standard and destination
  • Drawings or specification files when available
One accountable supplierGoEastAI confirms the quotation, supply scope, delivery and after-sales responsibilities with the client.
Selected product · no category selection needed35 kV Dry-Type Transformer · PWR-024Power & Transmission Equipment