GoEastAI Request a Quote
HomeEquipmentPower & Transmission EquipmentTransmission Supporting DevicesAmorphous Alloy Oil-Immersed Transformer (PWR-030)Amorphous Alloy Oil-Immersed Transformer
Amorphous Alloy Oil-Immersed Transformer full equipment view 1 / 2
Full equipment view
Amorphous Alloy Oil-Immersed Transformer (PWR-030)Item PWR-030

Amorphous Alloy Oil-Immersed Transformer

非晶合金油浸式变压器

Oil-immersed power transformer using an iron-based amorphous-alloy core for reduced no-load loss and current.

Project-specific configurationOnly sourced values are shown. GoEastAI confirms remaining parameters during technical review.
Request this equipment Ask a question

Manufacturing source: Baoding Zhongyi Electric Group Co., Ltd. — Supplier Profile

Equipment overview

Built around the confirmed duty

The official source identifies an iron-based amorphous-metal core and describes the product as a low-loss, high-efficiency power transformer. The page states more than 60% lower no-load loss and more than 50% lower no-load current compared with the cited conventional S11 design.

Working principle

The amorphous-alloy core reduces magnetic losses while transformer oil provides insulation and carries heat away from the windings.

Power and transmission equipment selection is based on power or torque, speed, load profile, service factor, electrical supply, mounting, environment, efficiency and integration requirements.

Core features

  • Iron-based amorphous-alloy core
  • Reduced source-stated no-load losses
  • Oil-insulated distribution configuration
Technical parameters

Reference specification checklist

Use these common industrial selection fields to prepare the inquiry. They are not a manufacturer datasheet or guaranteed performance values.

Source-supported dataValues currently supported by supplied material
ParameterConfirmed valueBasis
Core materialIron-based amorphous alloyOfficial product page
No-load loss reductionMore than 60 %Supplier comparison with cited S11 design
No-load current reductionMore than 50 %Supplier comparison with cited S11 design
Cooling and insulationOil immersedOfficial product title
Planning reference

Parameters to confirm before quotation

Final values remain subject to supplier technical review.

Swipe horizontally to view all parameter columns.

ParameterReference settingTypical unitSelection note
Rated power / torqueContinuous and peak dutykW / N·mInclude starting and overload requirement
Input / output speedProcess requirementr/minOperating range, ratio and direction as applicable
Electrical supplyDestination-specificV / Hz / phaseVoltage tolerance, starting and harmonic limits
Load profile and service factorRequired—Hours, starts, shock, inertia and reversing duty
Protection and environmentSite design basisIP / °CAmbient, altitude, dust, moisture and hazardous area
Mounting and shaft interfaceConfirm drawingmmFrame, flange, foot, shaft, key and coupling details
Efficiency / insulationProject targetIE class / classEfficiency, insulation, cooling and temperature rise
Control and monitoringLocal / VFD / plant integrated—Sensors, protection, communication and condition monitoring
Application and configuration

Build the inquiry around the real project

Use the product type as the starting point, then confirm service conditions, options, documentation and delivery requirements.

01

Typical applications

Energy-efficient distribution networksUrban and rural grid upgradesIndustrial power distribution
02

Materials and options

  • Winding conductor, core, insulation and enclosure materials are confirmed for the selected design.
  • Corrosion protection and environmental protection level are selected for the installation site.
  • Voltage ratio, capacity, vector group, impedance and tapping arrangement to be confirmed.
  • Monitoring, protection, enclosure, cable interfaces and accessories to be confirmed.
03

Standards and documents

  • Applicable national, IEC and destination requirements are confirmed during technical review.
  • Routine, type and special test scope is agreed in the quotation.
  • Manufacturer and model confirmation
  • Technical datasheet and dimensional drawing
  • Inspection, certificates and manuals
Supply and support

Delivery, packing and after-sales

Final scope, responsibilities and timing are confirmed in the quotation.

04

Delivery

  • Manufacturing schedule, Incoterm and shipment scope are confirmed after technical review.
  • Final delivery timing depends on the confirmed rating, configuration, testing and destination.
05

Packing and shipping

  • Export packing and moisture protection are selected for the final dimensions and transport route.
  • Bushings, instruments, loose parts and document packs are protected and identified for shipment.
06

After-sales

  • Installation guidance, commissioning support and spare-parts scope are confirmed in the quotation.
  • Warranty conditions and response responsibilities are agreed before order placement.
Similar products

Explore related equipment

Products in the same equipment family are shown first, followed by other relevant products in the same industrial system.

Request a quotation

Request this equipment directly.

The selected product is already linked to this RFQ. Add the duty, quantity, destination and any required standards so GoEastAI can prepare the correct supply proposal.

  • Equipment and intended application
  • Capacity, standard and destination
  • Drawings or specification files when available
One accountable supplierGoEastAI confirms the quotation, supply scope, delivery and after-sales responsibilities with the client.
Selected product · no category selection neededAmorphous Alloy Oil-Immersed Transformer · PWR-030Power & Transmission Equipment